Looks like I’ll be cutting the grass in a thunderstorm again. Don’t mind the fresh air and breeze but those lightenings stricken don’t help the mower any. But the grass is more than high so, fun. Tried to clear the ac handler with the snake but no good, too many ninety degrees bends. Forced to reroute the bloody thing to the front of the house. Added a universal to the top and moved the first section after cutting it. Everything dry fitted at the moment. Used as much as the old pic as I could. Drawing through the garden hose fine. Need to make the p trap today and glue it all up. Then seal the hole in the wall, losing the hose. Will drain in gravel behind bushes. And…I did the job with 45s angles. One 90 at bottom, no clue why, I drilled the hole at 45, but I’ll add. Another universal above it. Be able to snap the trap, not gluing one couple, and pull it out. No more trouble. Screen the pipe opening and insulate. Still not sure why I have the original issue. I had flushed the pipe, pressured it with air, and had suction with the wet vac. Pulled both side panels and it looks fine. The t switch still went off. Go figure. Anyway, the old pipes are cut and capped.
Almost finished with twelve months. Maybe later today. “I just need more time.” 😉
COMMENTS
-